Mainly used in polymerization of Olefins and dienes by Ziegler-Natta Catalyst synthetic. transparent liquid Aluminum (Wt%):>23%.
Aluminum triethyl (Wt%) >94%.
DENSITY AT 25 C.: 0.835 g/cm3.
BOILING POINT: 186.6 .(760mmHG).

Pure Titanium and Titanium salts, iridescent effects in glass, smoke screens, Titanium pigments,
Polymerization Catalyst. Purity (TiCl4): 99.9% min.
FeCl3: 0.002% max.
SiCl4: 0.01% max.
VOCl3: 0.0024% max.
Vanadium: 0.0007% max.

Polyolefin catalyst, intermediate of organic compound (C2H5) 2AlCl Aluminum (Wt%): 21.9-22.4, Chlorine (wt %) 29.2-29.8, Cl/Al(mole/mole): 0.97-1.03 C2: vol% :>97.5%.

Epichlorohydrin is a chemical intermediate used primarily in the manufacture of epoxy Resins and synthetic Glycerol. It is also used in the production of elastomers, Polyamines, water treatment chemicals flame retardants and a variety of Glycidyl derivatives. C3H5ClO, EPICHLOROHYDRIN:
1.180- 1.183

Acetone is a solvent for plastics, pharmaceutical Industry, synthetic fibers, for thinning Polyester Resin, cleaning tools used with it, used as one of the volatile components of some paints and varnishes. As a denaturant in alcohol. Acetone is also present as an excipient in some pharmaceutical drugs. Purity (wt%) 99.5 GC.
Specific Gravity @ 20/20C 0.7910 -0.7930 Water (wt%) 0.5, Acidity as Acetic Acid (wt%) 0.002, Alkalinity as NH3 (wt%) 0.001.

Widely used in production of adhesives, structural shapes, electrical laminates. Also this product is used in manufacture of caprolactam, bisphenol-A, herbicides, wood preservatives, hydraulic fluids, lube oil additives, pharmaceutical,coating materials and as intermediate for plasticizers and other specialty chemicals. C6H6, white crystalline, odorless compound, Mw:94.11, density:1.07g/cm3, water:% <0.15(m/m), purity:>99.85%(m/m), Fe: <0.5ppm, Methanol: <60ppm, Hydroxy acetone:<2ppm

Used as a solvent and extractant, starting material for many organic compound, solvent for natural and synthetic resins. Also is used in production of cellulose lacquers. C3H8O, purity: 99.9%, water content: Max 0.1%, Acid Content: Max 0.001%.

Activated carbon is used in gas purification, decaffeination, gold purification, metal extraction, water purification, medicine, sewage treatment, air filters in gas masks and respirators, filters in compressed air and many other applications. C, Mesh 12-40, Iodine number ≥1000 mg/g, Apparent.
Density 0.45-0.55 g/cm3, Total pore.
Volume 0.9 g/cm3.

As acid neutralizing agent in polyolefin, contribution to keep the color stability and enhance.
The corrosion of polyolefin. As lubrication or processing agent to improve the processability of the polyolefin, polyamide,
Styrene and rubber during the extrusion molding and pressing molding.
C36H70CaO4, White powder, insoluble in water, Oxide wt%: 9.2-10.0,
Free fatty acid wt% Max.1.0, Melting point ℃ 150.0-160.0,
Moisture wt% Max. 3.0.

The activated bentonite catalyst and sorbent effectively removes Olefins that can contaminate downstream.
Adsorption and catalytic units.
Hydrated Sodium Calcium Aluminum Magnesium Silicate Hydroxide.
Size≤300μm % ≤5.0.
Size:1000~300μm, % ≥85.0.
Packed Bulk Density kgs/m3 650~900.
Surface Area: m2/gram ≥180.
Crush Strength: N/particle ≥0.7.
Decolorization Rate: % ≥90.

Helium is used as a protective gas in growing silicon and germanium crystals, in Titanium and Zirconium production, and in gas chromatography, it is also useful in supersonic wind tunnels [91] and impulse facilities. He, He (%):99.999%.
O2 (ppm) .<2.0.
N2 (ppm) <5.0.
CnHm (ppm) <1.0.
CO2+CO (ppm) <0.5%,H2O (ppm) <2.0.

Extraction and recycling of organic raw materials in petrochemical industry,
Refining of lubricating Oils,
As solvent of polymers and in polymerization.

As solvent of resin processing in the manufacture of coatings, lacquer for floor, varnish, compound.
C5H9NO, Purity 99.50 min%, Moisture 0.03 max%.
Density: 1.028-1.036 g/ml.
Butyrolactone: 0.035 max%.
Total amine: 50 max ppm.

Detergent whitener (instead of bluing agents).
Paper, brightening (internal or in a coating),
Fiber whitening (internal, added to polymer melts).
Textile whitening (external, added to fabric finishes).
Color-correcting or brightening additive in advanced cosmetic formulas.

Compressors, Food grade applications, Pharmaceutical grade applications, LDPE insulation. compressors, Food grade applications, Pharmaceutical grade applications, LDPE insulation.

Long life lubricants formulated especially for flooded screw compressors. Other viscosities are available for specific applications. Custom-blended polyalphaolefin (PAO) synthetic hydrocarbon fluids giving improved lubrication at high and low temperatures, reduced volatility, good chemical inertness and hydrolytic stability, and compatibility with mineral oils and equipment designed for use with mineral Oils.

mainly used in synthetic rubber, adhesives, pigments, dyestuff surface treatment, coatings, inks, etc.
Disproportionate rosin is made from gum rosin through catalyzing by the Pd-C.
Catalysts. Appearance Transparent.
Abiotic Acid: % ≤ 0.50
Dehydroabietic Acid: % ≥ 48.0.
Acid Value, mg/g ≥ 150.0-160.0.
Unsaponifiable Matter, % 9.0.

Used for deep drying of the petrochemical Gas and liquid. Air drying (PSA TSA), instrument Air/supersonic wind tunnel/compressed air drying White and porous sphere, insoluble in Water and Alcohol, Non-toxic, tasteless, odorless and no powdering and soften in Water and Alkaline solutions.

It is used on an industrial scale as a Polymerization initiator for Emulsion Polymerizations. It is usually sold in a light yellow liquid solutions of about 50% strength.
Light yellow liquid (50% solution).
MW: 172.26 g mol−1

catalyst for production of Polyolefins and SBR, OCTYLATING agent, LLDP.
(N-C8H17) 3AL, MW: 366.65g/mol.
Freezing point: -50c, density (-20c): 0.860 gr/cm3, viscosity (-20c): 338mPa.s, vapour pressure: 80c.

Used as Solvent, curing agent, activating agent and pesticide intermediates.
C2H6S2, Purity 99.5% min.
Sulfur 68% min.
Methanethiol 0.1% max.
Moisture 0.06% max.
Dimethyl Polysulfide 0.2% max.

largely for air conditioning applications, An important application of R-22 is as a precursor to Tetrafluoroethylene .
CHCLF2, clear and colorless.
Smell: no uncommonly odds.
Purity: 99.9% min.
Moisture: 0.01% max.
Evaporating residue: 0.01% max.

Air plant feed purification (simultaneous removal of H2O and CO2).
l Drying and desulphurization of natural gas, Liquefied petroleum gas,
liquefied hydrocarbon.
L Drying of general Gas.
l Pressure Swing Adsorption (PSA) Oxygen-making.
Size mm 1.5-1.9.
Diameter : 10A.
Static Water Adsorption wt%:> 25.
Static CO2 Adsorption wt%: >17.5.
Bulk Density : kg/m3 >610.
Crushing Strength : >30N.
Water content, as shipped : wt% 1.5.

Furfural is an important renewable, non-petroleum based, chemical feedstock. Hydrogenation of furfural provides furfuryl alcohol (FA), which is a useful chemical intermediate and which may be further hydrogenated to Tetrahydrofurfuryl Alcohol (THFA). THFA is used as a nonhazardous solvent in agricultural formulations and as an adjuvant to help herbicides penetrate the leaf structure.
C5H4O2, Purity 98.5% min.
Specific gravity 20/20℃ 1.159 MIN.
Distillation range ℃ 149-170.
Acid Value mole/l 0.02 max.
Sulfates NON.
Ashes 0.006% max.
Water content (WT) 0.2% MAX.

Potassium Hydroxide. (Potash).
It is mainly used in alkaline batteries industry, soaps, high-class detergents and cosmetic, medicine intermediate, potassium chemicals, synthetic rubber, ABS resin, food additive dyestuffs and so on.
White flakes. It is one of the strongest alkalis. react quickly with moisture liberating heat.


Non-polluting thermal-oxidation resisting antioxidant. suitable for SBS, TPR, TPS, PS, SBR, BR, PVC, PE, PP, ABS and other rubber elastomers, colorless or amber thick fluid.


Vinyl Acetate Monomer is soluble in most organic solvents including chlorinated solvents, but is not soluble in water. Vinyl Acetate Monomer is easily polymerized with acrylate esters to produce polymers. It is inhibited with hydroquinone.
Vinyl acetate monomer is a colorless liquid with a low flash point. It has a characteristic odor.

Protection for variety of metals in different cooling systems based on the customer need in refineries, power stations, petrochemical industries and etc.

It is miscible with Water and almost all common organic solvents, slightly soluble in aliphatic hydrocarbons.
Intermediate used in the production of:
• pharmaceuticals
• agricultural chemicals
• dye intermediates
• textile chemicals
• paper chemicals
• rubber chemicals
• corrosion inhibitors
• optical brighteners
• emulsifiers
• plasticizers
• curing agents for epoxy resin
• photographic chemicals
• catalysts for polyurethane resins
Morpholine is a colorless, hygroscopic
liquid free of suspended matter

Paraformaldehyde has documented uses as a disinfectant, fungicide, fixation reagent and in the preparation of formaldehyde. In rescence studies, paraformaldehyde has been used as as a formalin fixative to fix cells and tissues. To use the chemical as a fixative, it must be converted to the monomer formaldehyde by heating as formaldehyde is the active chemical in fixation
Solid. (Amorphous solid powder.)
Odor: Formaldehyde. Pungent. (Slight.)

The clay acquired the name bleaching earth from its ability to remove color pigments from oils and other chemicals. It can also remove the colors commonly associated with Carotenoids, Chlorophyll, and Pheophytine. Bleaching clay also has the ability to absorb unpleasant odors, including those produced by ammonia, sulfurs, and tars. Manufacturers commonly use this compound to filter the impurities from petroleum products, ranging from food grade Oil to jet fuels. Combined with salt water, these earth clays are commonly used as a lubricant for drilling Oil. Some manufacturers use the clay substance as an ingredient in beauty products as well, and attapulgite is a constituent of some antidiarrheal medications.

Iodine is the most electropositive halogen and the least reactive of the halogens even if it can still form compounds with many elements. Iodine sublime easily on heating to give a purple vapour. Iodine dissolves in some solvents, such as carbon tetrachloride and it is only slightly soluble in Water.
Co-catalyst for the production of Acetic Acid by the Monsanto and Cativa processes.
Gray-black flakes with a metallic luster and characteristic odor.
Solubility: Soluble in alcohol and other organic solvents, but not in water.

The solvent properties of DMF are particularly attractive because of the high dielectric constant , the aprotic nature of the solvent, it’s wide liquid range and low volatility.
It’s frequently used for chemical reactions and other applications, which require a high solvency power. The product is known as a universal solvent.
Clear colorless, hygroscopic liquid with a slight amine odor.

It is white or yellowish or reddish solid, toxic solid, organic matter. Soluble in Water, soluble in Water, slightly soluble in methanol, n-octanol. And it has the dangerous of Combustion and explosion.
This product is used as a high efficiency of polymerization inhibitor, especially suitable for Styrene, Butadiene, Isoprene Chloroprene and Vinyl Chloride Monomer. This product also could be as Antioxidant for Polyethylene, Polypropylene, Polychloroprene, Nylon and Synthetic rubber, Polymer, Ethyl Cellulose, lubricating Oil.
White Solid.
Melting point 52 - 55 °C (126 - 131 °F).
56 - 58 °C (133 - 136 °F).

Bisphenol A (BPA) is a difunctional phenolic compound produced by the condensation of acetone and phenol. The polycarbonate grade (BPA-157) is essentially 2,2-bis (p-hydroxyphenyl) propane (see formula below) with only trace amounts of other isomers.
Polycarbonate Grade Bisphenol A is a white flaked solid of high purity used as a major ingredient in high molecular weight linear polymers such as polycarbonates and polyesters.
White colorless Powder, Beads or Granules

Polymeric sterically hindered amine derivativeTINUVIN is the light stabilizer of choice for all applications calling for low volatility and minimal migration, because of its oligomeric structure with high molecular weight. Furthermore TINUVIN 622 is effective as antioxidant and contributes significantly to the long- term heat stability of polyolefins and tackifier resins.
TINUVIN areas of application include polyolefins (PP, PE), Olefin Copolymers such as EVA as well as blends of Polypropylene with Elastomers. In addition TINUVIN is highly effective in Polyacetals, Polyamides and Polyurethane applications.
White to slightly yellow powder, odorless.
Melting point ℃ 50~70.

Antistatic Agent-163 is a synthetic ethoxylated Amine in liquid form for use as both an internal and an external anti-static agent. It is effective in Polyolefins and Styrenics.
It’s used as an internal anti-static agent in HDPE, LDPE, Polyolefins, PP and Styrenics (clear).
Also used as an external anti-static agent in ABS, EVA, HDPE, Ionomers, Nylon, PC, PP, PVC, Rubber and so forth.
Use level: the suggested use level is 0.05-0.15% in Polyolefins and 1.0-1.5% in Styrenics. For spezifisch use can be test by the customers.
pale yellow, odourless liquid at 25℃.

Hexane is characterized as a complex mixture of aliphatic hydrocarbons obtained by hydrogenation of a Petroleum fraction that consists primarily of normal, Isoparaffinic, and Cycloparaffinic C6 Hydrocarbons.

Aromatic hydrocarbon content is less than 0.01% weight.
Mainly used in HDPE manufacturing.
Hexane is a liquid solvent used in industrial, professional, and consumer products such as adhesives and coatings. It can also be used in food contact applications such as a solvent for oil seed extraction.
Liquid gasoline like liquid.
Boiling Point: 62 - 69°C @ 760 mmHg.

Clear Transparent Liquid Initial Boiling Point: 66 c.

Use level: It can be wildly used for PE, PP, PC Resin and so on. The amount to be used maybe 0.1%-1.0%.
It is a kind of Phosphate ester antioxidant. Good synergistic with antioxidant, applied in plastic contact food. The amount to be used maybe 0.1%-1.0%.

Irganox 1010 – a sterically hindered phenolic antioxidant – is a highly effec- tive, non discoloring stabilizer for organic substrates such as plastics, syn- thetic fibers, elastomers, adhesives, waxes, oils and fats. It protects these substrates against thermo-oxidative degradation.
Irganox 1010 can be applied in polyolefins, such as Polyethylene, Polypro- pylene, Polybutene and Olefin copolymers such as Ethylene-inylacetate copolymers. Also, its use is recommended for the processing of Polymers such as Polyacetals, Polyamides and Polyurethanes, Polyesters, PVC, Sty- rene homo- and copolymers, ABS, elastomers such as Butyl rubber (IIR), SBS, SEBS, EPM and EPDM as well as other ynthetic rubbers, adhesives, natural and synthetic tackifier resins, and other organic substrates.
White free flowing powder.
Melting Range: 110-125 c.

Activated Alumina is used for a wide range of Adsorbent and Catalyst applications.
It is manufactured from Aluminium Hydroxide by dehydroxylating it in a way that produces a highly porous material; this material can have a surface area significantly over 300 square metres/g.
White globates or beads with little or no odor.

Melting point: 2045 c

Organic Polycarboxylic Acid.
Metal working fluids (semi-synthetic and synthetic) high water based hydraulic fluids (HFC) engine coolants (Na salt of IRGACOR® L 190).
White wet cake containing about 50% water.

Water Teartment, Polymerization, Phootgraphic Chemicals, Decolourisation, Inhibitors, Silicon Rubber.
A colorless to pale yellow transparent liquid, available as 98% DEHA and also as 85% solution in water.

Increase the knock resistance of the fuel.
An organic compound with the formula (CH3)3CCH2CH (CH3)2. It is one of several Isomers of Octane (C8H18). This particular Isomer is the standard 100 point on the Octane rating scale (the zero point is n-heptane).